![]() |
PDK API Guide for J721E
|
This file contains macros and structures used internally by sciclient_rm.
Go to the source code of this file.
Data Structures | |
struct | Sciclient_rmIaUsedMapping |
Describes the IA events used by ROM and if they've been cleared back to hardware reset values. More... | |
struct | Sciclient_rmIaInst |
Interrupt aggregator instance containing data required to manage interrupt route discovery using an IA. More... | |
struct | Sciclient_rmIrUsedMapping |
Describes a range of IR input to output mappings used by ROM and if they've been cleared back to hardware reset values. More... | |
struct | Sciclient_rmIrInst |
Interrupt router instance containing data required to manage interrupt route discovery using an IR. More... | |
struct | Sciclient_rmIrqIf |
IRQ connection interface. More... | |
struct | Sciclient_rmIrqNode |
Macros | |
#define | SCICLIENT_RM_DEV_NONE 255 |
#define | SCICLIENT_RM_IA_GENERIC_EVT_RESETVAL 0xFFFF |
#define | SCICLIENT_RM_IR_MAPPING_FREE 0xFFFF |
Functions | |
int32_t | Sciclient_rmProgramInterruptRoute (const struct tisci_msg_rm_irq_set_req *req, const struct tisci_msg_rm_irq_set_resp *resp, uint32_t timeout) |
Finds and programs an available interrupt route via System Firmware based on the input parameters. More... | |
int32_t | Sciclient_rmClearInterruptRoute (const struct tisci_msg_rm_irq_release_req *req, const struct tisci_msg_rm_irq_release_resp *resp, uint32_t timeout) |
Mapping resources from AM65xx PG2.0 to AM65xx PG1.0. NOTE: Not all the PG2.0 resources are mapped to PG1.0. Due to this the API is programmed to return failure if a match is not found. More... | |
int32_t | Sciclient_rmTranslateIntOutput (uint16_t src_dev_id, uint16_t src_output, uint16_t dst_dev_id, uint16_t *dst_input) |
Translates an interrupt router or aggregator output to the peripheral input or IR input it's connected to. More... | |
int32_t | Sciclient_rmTranslateIrqInput (uint16_t dst_dev_id, uint16_t dst_input, uint16_t src_dev_id, uint16_t *src_output) |
Translates a peripheral input to the connected interrupt router or aggregator output. The primary use of the function is to retrieve the interrupt router or aggregator output connected to a processor input IRQ. More... | |
Variables | |
struct Sciclient_rmIaInst | gRmIaInstances [SCICLIENT_RM_IA_NUM_INST] |
struct Sciclient_rmIrInst | gRmIrInstances [SCICLIENT_RM_IR_NUM_INST] |
const struct Sciclient_rmIrqNode *const | gRmIrqTree [SCICLIENT_RM_IRQ_TREE_SIZE] |
const uint32_t | gRmIrqTreeCount |
Sciclient map structure | |
const Sciclient_MapStruct_t | gSciclientMap [SCICLIENT_CONTEXT_MAX_NUM] |