![]() |
PDK API Guide for J721E
|
Secure Proxy Transfer (Messaging) APIs.
Go to the source code of this file.
Functions | |
int32_t | Sciserver_SproxyMsgIsPending (uint16_t rx_config_id) |
Check to see if a message is pending on a Rx sec proxy thread. More... | |
int32_t | Sciserver_SproxyMsgGetSenderHostId (uint16_t rx_config_id, uint32_t *sender_host_id) |
Find the Sender's Host ID for a pending message. More... | |
int32_t | Sciserver_SproxyMsgRead (uint16_t rx_config_id, uint32_t *rx_buff, uint32_t rx_num_words) |
read a message (but dont ack) More... | |
int32_t | Sciserver_SproxyMsgReadAtOffset (uint16_t rx_config_id, uint32_t *rx_buff, uint32_t rx_num_words, uint32_t offset) |
read a portion of the message (but dont ack) More... | |
int32_t | Sciserver_SproxyMsgAck (uint16_t rx_config_id) |
acknowledge receipt of message to hardware More... | |
int32_t | Sciserver_SproxyCanSend (uint16_t tx_config_id) |
Check to see if we can indeed transmit a message. More... | |
int32_t | Sciserver_SproxyMsgSend (uint16_t tx_config_id, uint32_t *tx_buff, uint32_t tx_num_words) |
send a message (stage it, but don't complete transmissions) More... | |
int32_t | Sciserver_SproxyMsgSendAtOffset (uint16_t tx_config_id, uint32_t *tx_buff, uint32_t tx_num_words, uint32_t offset) |
send a message (stage it, but don't complete transmissions) More... | |
int32_t | Sciserver_SproxyMsgFinish (uint16_t tx_config_id) |
Confirm to hardware to transmit a staged message. More... | |
int32_t | Sciserver_SproxyMsgValidateHostId (uint16_t host_id) |
Function to trivially verify if the provided host_id is a valid ID. More... | |
int32_t | Sciserver_SproxyGetResponseConfId (uint16_t host_id, uint16_t *tx_config_id) |
Retrieve the Tx thread config ID for response to a host ID. More... | |
int32_t | Sciserver_SproxyGetNotifyConfId (uint16_t host_id, uint16_t *tx_config_id) |
Retrieve the Tx thread config ID for notification to a host ID. More... | |